What changes have occurred in the closing section of the insulating glass production line?

During the reproduction process of insulating glass equipment, when the glass reaches the final segment, it begins to change. The internal integration in the fifth paragraph is the transitional section, while the external integration and internal integration in the fifth paragraph are the most critical section, where the pieces are combined. This section is used for closing the insulating glass sheets. The movable panel is controlled by the hydraulic system, and the forward and backward movement parameters are controlled by the travel switch on the fixed panel. When the first piece of glass reaches the photoelectric switch at the end of this section, the glass decelerates and the side positioning is raised at the same time. , the glass will stop when it reaches the side positioning. At this time, the movable plate retreats and stops when it hits the retreat travel switch.

The lower support moves upward and the cross beam moves downward. When the photoelectric switch 1 on the cross beam detects the second piece of glass, the cross beam decelerates and moves downward. When the photoelectric switch 2 on the cross beam detects the second piece of glass, the cross beam stops moving downward;

The second piece of glass is transported forward through the lower support and the conical wheel on the cross beam and the stick on the movable plate. When the photoelectric switch on the end of the cross beam detects the second piece of glass, the second piece of glass decelerates to the side positioning. ; The lower support moves downward to reset, and the crossbeam moves upward and stops after hitting the travel switch; generally when producing the first few pieces, step on the foot switch, and the compression cylinder will have a compression roller to press the two pieces of glass together, and at the same time The insulating glass is transported to the pressing section; check the glass closing situation. If the glass closing is good, directly drive it to the closing automatic (without stepping on the foot switch), and so on.