Insulating glass production line operating procedures of the main steps and precautions

2025/01/14 13:43

Insulating glass production line operating procedures of the main steps and precautions

1.‌ Preparation ‌ :

① Open the total power supply and air source of the insulating glass production line.

② The water tank of the cleaning machine is filled with water, and the water heater is turned on in winter.

③ Turn on the insulating glass equipment transfer, inspection lamp, fan, brush, water pump ‌.

2.‌ Procedure ‌ :

① Put the glass into the feed section of the insulating glass production line with a glass lifting machine or a fully automatic loading and unloading machine.

② The glass enters the cleaning and drying room in turn, and after cleaning the glass through the brush and squeezing roller in the cleaning machine, the high-power fan will dry the cleaned glass.

③ When the cleaned glass enters the inspection section, check the quality of the glass cleaning.

④ The first piece of glass enters the box segment, the aluminum frame is automatically positioned, the aluminum frame coated with butyl glue is placed on the glass, waiting for the second piece of glass to be cleaned, and the film is automatically closed.

⑤ The glass of the closed piece automatically enters, and the plate with the four corners of the plate is pressed inside, and the glass is pressed.

⑥ The pressed glass is automatically transferred to the insulating glass sealing line, and the glass edge sealant is applied ‌.

 After applying the edge of the glass glue, use a glass lifting machine or automatic cutting machine to place the finished insulating glass on the glass frame.

3.‌ Operations at the end of each shift ‌ :

① Press the "system stop" button, and the insulating glass production line automatically stops the transmission motor, fan, brush motor, and water pump in turn.

② Turn off the main power supply, air circuit and air compressor, and drain the sewage in the water tank.

4.‌ Safety operation procedures ‌ :

① Insulating glass equipment and measuring tools should meet the requirements of national industry standards, and regular inspection and measurement certification.

② The production of insulating glass should have cutting equipment, edging equipment, cleaning and drying machine, frame, sheet, sheet press, manual or automatic sealing machine ‌.

③ The glass must be edged before cleaning, otherwise it will damage some components.

④ Clean the water tank every day to replace the water, keep the water clean. Keep the water tank above 2/3. It is absolutely prohibited to start the pump or start water heating when the tank is empty ‌.


Related Products

x

Submitted successfully

We will contact you as soon as possible

Close