Precautions for the use of automatic insulating glass glue machine:

The use of automatic insulating glass glue machine need to pay attention to the following matters:

1. Temperature: The construction temperature of insulating glass sealing wire is usually between 5-40°, and the construction temperature below 5° or above 40° should be avoided as far as possible, because the temperature is too low or too high will affect the bonding performance of the sealing wire.

2. Cleaning: Before construction, ensure that the surface on both sides of the insulating glass sealant line is clean, free of oil, dust and other impurities to ensure that the sealant can adhere effectively.

3. Ratio: According to the instructions of the automatic insulating glass sealing line, the pressure and ratio of the glue gun are correctly adjusted to ensure that the mixed glue is uniform and the best sealing effect is achieved.

4. Pressure: In the process of use, the appropriate pressure is conducive to the dense connection between the sealant and the insulating glass, but too much pressure may cause the insulating glass to break and the sealant to extrude uneven. The system procedure of the insulating glass sealing line requires frequent maintenance, and the data cannot be easily changed

5. Curing time: the curing time of the sealant line varies according to the brand and model, according to the instructions of the product, it is necessary to wait enough time after construction to ensure that the sealant line is fully cured and achieve the best adhesion effect.