Glue adjusting rod-manufacture,factory,supplier from China

Introduction to the Butyl Coating Machine Glue Regulating Rod The glue regulating rod is an essential component of the butyl coating machine. Its main function is to control the amount of glue that is applied during the coating process. By adjusting the position of the regulating rod, operators can effectively control the thickness and consistency of the glue layer. The regulating rod is made from high-quality materials such as stainless steel, ensuring durability and longevity.

Glue NozzleUsage: Suitable for a fully automatic gluing machine in insulating glass equipment.The glue nozzle in the gluing machine of insulating glass equipment is a critical component used to evenly apply adhesive onto the glass frame. It is located at the end of the gluing machine and is responsible for conveying adhesive from the adhesive supply system onto the glass frame.Here is an introduction to the glue nozzle in the gluing machine of insulating glass equipment:1. Structure and Material: Glue nozzles are typically made from corrosion-resistant materials, such as stainless steel.

Purpose: Used for applying silicone sealant in insulating glass applications.The pneumatic swap valve for the hole glass gear coating desktop is a key thing used to manipulate the go with the flow of adhesive.This change valve is pneumatically operated, that means it is activated or deactivated with the aid of a managed air source.

Equipment Features:1. One-key power switch, simple operation, mature technology.2. Encoder aluminum strip depth detection, cylinder-driven non-stick glue, more accurate detection.3. Pioneering the use of two bent mixing nozzles, with a simple and convenient structure, and the option for a non-burning mixing nozzle.4. The nozzle switch and mixing switch can replace any domestic pneumatic switch.5. The guide wheel uses double-layer materials, with a higher design cost, a more wear-resistant surface, and more flexible internal rotation.6.

Equipment Features:1. Heavy-duty machine body design for stable and reliable operation.2. One-time clamping can complete milling for all drainage holes and pressure balance holes in a single profile.3. Utilizes variable frequency high-speed motors for minimal noise, high speed, and ensuring an extended tool life with high milling precision.4. The feed structure is designed with a servo motor and screw rod movement for high operational accuracy.5. Modular structure with six milling heads, capable of independent or linked movement.6.

B-Glue PumpUsage: Suitable for use in insulating glass (IG) sealing machines.The B-glue pump in an insulating glass sealing machine plays a crucial role in supplying adhesive (B-glue) to ensure a stable and uniform distribution of glue. The B-glue pump typically consists of an electric motor and a pump body.

Equipment Features:1. The equipment is equipped with three high-speed milling motors that can work independently. The motor speed can reach up to 18,000 rpm, ensuring a very fast milling speed. After milling the drainage slots, there are no burrs or bends.2. The machine uses internally designed and custom-made tools, with a fast feed rate and no dwell phenomenon. The normal service life of the tool can reach one year, providing excellent results.3. Adjusting the tool position and depth on this machine is very convenient, with a user-friendly design.4.

Purpose: Used in fully automatic insulating glass gluing machines for the conveyance of adhesive.The handheld glue gun of hollow glass equipment is a convenient and versatile tool used for the precise application of adhesive material in various gluing processes. It provides a manual and controlled method of dispensing adhesive onto glass panels.The handheld glue gun is typically lightweight and ergonomically designed for comfortable and easy handling.

Equipment Features:1. The inner surface of the glue tank is coated with Teflon to prevent carbonization, ensuring the glue is in optimal condition and reducing blockages.2. The gear pump adopts variable frequency speed regulation for precise control of glue output.3. Precision filtering device removes impurities to prevent nozzle blockage.4. Temperature control utilizes precise PID intelligent control.5. The control system has high and low-temperature protection to prevent equipment damage.6.

Glue MixerUsage: Suitable for the mixing of adhesive A and B in a fully automatic gluing machine.1. A glue mixer is an important component in the gluing machine of insulating glass equipment, used to uniformly mix solid particles in the adhesive to provide consistent adhesive quality and stable adhesive application results.

Equipment Features:1. Mainly used for the construction of two-component polysulfide sealant and two-component silicone structural adhesive.2. The machine has outstanding performance, stable system, and the continuous and smooth dispensing ensures high reliability.3. Easy to use, good mobility, and convenient maintenance.4. The machine has extremely high production efficiency, replacing the workload of 3 to 6 people with one machine.5. Effectively avoids the defects of air inclusion and unstable quality in manually applying sealant.6.

Equipment Features:1. CNC Press Bar Saw for plastic profiles, specifically designed for cutting pressure bars for plastic-steel doors, windows, and glass.2. The cutting main unit employs a high-precision spindle motor.3. Two saw blades arranged in an X-shaped configuration, equipped with two sets of dedicated milling cutters.4. The installation claws for pressure bars can be chamfered at a 45° angle for operator convenience.5. Patented design of the horizontal clamping mechanism allows for adjusting according to different width pressure bars.6.

Cleaning Conveyor BeltsUsage: Suitable for cleaning conveyor belts in a fully automatic gluing machine.The gluing machine of insulating glass equipment typically consists of conveyor belts and a glue supply system.

Equipment Features:1. Convenient operation, stable and reliable performance.2. Stainless steel brushed panel for a clean tabletop and an aesthetically pleasing appearance.3. Advanced pneumatic-liquid boosting system for uniform and stable pressure.4. Photoelectric switches controlled by a PLC computer program, with an adjustable speed belt drive.5. Dual motor oil cylinders for the motor, equipped with a large-volume glue tank capable of loading 14L of butyl rubber at once.6. The main pump of the boosting system uses an imported brand booster pump.7.

Equipment features:1. For switching use of glue system, or switching use of two kinds of glue (optional).2. The third section can be pre-stored glass to improve production efficiency.3. Adopt imported brands of low-voltage electrical appliances, pneumatic components, guide screw, sensors, PLC and other components, safe and reliable long life.4. High automation, high efficiency, suitable for glass deep processing enterprises.5. Simple interface, easy to use.6. Glued edge is full of airless line, the corner is full, and the surface of the four sides is flat without trimming the corner.7.

Performance characteristics;Adopt advanced imported original pneumatic pump system, make the equipment pressure more stable, and energy savingUse touch screen organic interface control system, the operation is more clear and simple.The use of frequency conversion speed control conveying system, is the speed of 1-5 speed from 15-35 meters/min optional.Takes the lead in adopting advanced automatic gluing system, which can be adjusted within 6-18.5mm.Rubber cylinder adopts rotary structure, 0-90 degrees of free rotation, more convenient glue release and maintenanceAdopt pre-heating system, arbitr

Equipment features:1. Heavy body design, stable and reliable operation2. Once clamping, can complete the milling of all the drainage holes and pressure balance holes of a material3. The use of frequency conversion high-speed motor, minimal noise, high speed, to ensure long service life of props, high milling accuracy4. The work structure is designed for servo motor with screw movement, with high running accuracy5. Modular structure, six milling heads, can be single action or linkage6.

Equipment Features:1. Suitable for shaping processing of various profile end surfaces, step surfaces, and end face grooves.2. Milling at any angle from 90° to 30° for profile end surfaces.3. The worktable is adjustable in height, accommodating various profiles.4. The tool spindle is connected through a coupling, ensuring that the precision of the electrically driven main spindle does not affect the working accuracy of the tool.5.

Equipment features:1. Fully automatic cutting and processing for straight or irregular shapes according to user requirements. Direct input of glass dimensions for cutting, real-time display of cutting patterns, and actual movement tracking for clear monitoring of equipment and processing conditions.2. Cutting pressure is entirely computer-controlled, ensuring high cutting quality.3. Rack and pinion components use high-quality products from internationally renowned brands, guaranteeing cutting precision, speed, and accuracy.4.

Equipment Features:1. The most advanced model with a heavy-duty machine body and mechanical design, ensuring stable and reliable performance.2. Single-layer welding design that can complete the welding of a rectangular shape in one cycle, providing high dimensional accuracy and efficient output.3. Utilizes high-precision linear guide motion pairs for all movements, ensuring stability, reliability, and an extended lifespan.4. All mechanical components are processed using CNC machining centers to guarantee the assembly accuracy of the entire machine.5.

Purpose: Used in automatic gluing machines for insulating glass, controlling the on/off flow of adhesive.The pneumatic switch valve for the hollow glass equipment coating machine is a key component used to control the flow of adhesive.This switch valve is pneumatically operated, meaning it is activated or deactivated by a controlled air source.

Introduction to the Heating Sealing Plate of the Butyl Rubber Coating Machine The heating sealing plate is an integral component of the butyl rubber coating machine. It plays a crucial role in the proper application and adhesion of the butyl rubber material to various surfaces. Made from durable and heat-resistant materials, the heating sealing plate is designed to withstand high temperatures during the coating process. Its main function is to provide controlled and uniform heat to the butyl rubber, ensuring an efficient and effective coating application.

Equipment features:1. Precise adjustment mechanism with computer-assisted calibration, maximizing the alignment of glass.2. When laminating tempered glass, 0.38mm film can be used without any bubble issues.3. Uses a PID closed-loop control heating system for intelligent flexibility.4. Heating control employs multiple temperature control curves, allowing simultaneous processing of glass of different sizes.5. Intelligent protection measures in the heating method prevent the furnace temperature from losing control, thereby avoiding scorching the glass surface.6.

The glass conveyor wheel is a crucial component in the process of handling and transporting glass within insulating glass equipment. It is specifically designed to safely and efficiently transport glass sheets along the production line.Constructed from sturdy wheels made of high-quality flame-retardant materials, the glass conveyor wheel ensures durability and the ability to handle the weight of glass sheets.