Four Edge Glass Grinding Machine-manufacture,factory,supplier from China

Equipment features:1. The machine is equipped with three beams and four grinding head groups, each grinding head group is equipped with two and three bottom edge grinding wheels, which is suitable for rough grinding chamfering and bottom edge processing of building hollow and door and window glass.2. Easy to operate, can automatically adapt to the change of glass length and width, loose processing efficiency close to the whole processing efficiency3. The conveying part is carried by rubber roller, which has stable conveying and long service life.4.

Equipment features:1. The base, main beam, grinding head seat, etc., are made of high-quality castings, sturdy, stable, and the square main beam never deforms.2. The grinding head motor uses a high-quality and advanced specialized motor, "Schneider" brand electrical components.3. Equipped with a 2.2kw wide-range speed regulator, Pearl River turbine gearbox for more durable transmission.4. Conveyor chain transmission, reinforced square tube frame can bear the processing of original thick glass.5. Continuous processing of glass of the same thickness is possible.6.

Equipment features:1. Continuous double straight-line parallel circular edge rapid grinding for flat glass.2. Uses a high-precision transmission structure with double straight-line guides and double ball screw.3. Convenient movement of the intermediate bracket.4. PLC control for automatic monitoring, detection, and alarm diagnosis.5. Smooth conveying with frequency conversion speed control.6. Automatic adjustment after setting processing parameters through the human-machine interface.7.

Equipment features:1. For switching use of glue system, or switching use of two kinds of glue (optional).2. The third section can be pre-stored glass to improve production efficiency.3. Adopt imported brands of low-voltage electrical appliances, pneumatic components, guide screw, sensors, PLC and other components, safe and reliable long life.4. High automation, high efficiency, suitable for glass deep processing enterprises.5. Simple interface, easy to use.6. Glued edge is full of airless line, the corner is full, and the surface of the four sides is flat without trimming the corner.7.

Equipment Features:1. This equipment is specifically designed for the use of filling inert gas in insulating glass, featuring automatic gas filling and detection for safety and efficiency.2. It can simultaneously perform gas filling operations on four pieces of insulating glass.3. Automatically displays the gas filling status.4. Utilizes imported gas analyzers for accurate analysis of the gas source, with a precision of 99.99%.5. The four-channel gas filling system can complete the gas filling process for four pieces of insulating glass.6.

Equipment Features:1. Specifically designed for welding colored profiles, with the ability to clean the weld bead in one pass after welding.2. Strict control of welding gap size, resulting in a smooth, aesthetically pleasing, and high-end appearance of the weld seam.3. The entire set of tools is made of alloy materials, undergoes precision processing through quenching, achieves standardization, and supports tool interchangeability.4. The machine body is welded with a high-rigidity frame, providing strong load-bearing capacity and resistance to deformation.5.

Equipment features:1. Industrial-grade computer control, automatically downloads optimized cutting data and process parameters, eliminating the need for manual input and adjustment.2. Automatically completes profile clamping, feeding, and cutting, with a high degree of automation.3. Gantry robot design capable of simultaneously clamping and cutting four profiles in one cycle, achieving high production efficiency.4. Linear motion pair guide rails for high precision in processing product dimensions.5.

Equipment Features:1. Full-process PLC control, frequency conversion control, touchscreen human-machine interface.2. The feeding section uses universal wheels for easy use of the mechanical arm to load glass, and is equipped with automatic glass height detection with seamless connection to sections 03 and 04.3. The input section has a coating detection device, ensuring stable and reliable detection.4. The gas-filling and pressing machine adopts four-axis servo linkage, integrating lamination, pressing, and inflation functions, ensuring that the argon content in insulating glass is ≥85%.5.

Main performance characteristics1. Adopt British motion controller control, touch screen man-machine interface, parameter setting is simple and fast.2. CNC servo motor feeding system, CNC bending Angle control system.3. Four storage tanks can store 4 different specifications of aluminum strips.4. When bending and cutting, the connection and arc between the aluminum strip are automatically avoided, and the bending is automatically cut.5. Manual operation function, easy to debug and repair equipment.6.

Equipment Features:1. The most advanced model with a heavy-duty machine body and mechanical design, ensuring stable and reliable performance.2. Single-layer welding design that can complete the welding of a rectangular shape in one cycle, providing high dimensional accuracy and efficient output.3. Utilizes high-precision linear guide motion pairs for all movements, ensuring stability, reliability, and an extended lifespan.4. All mechanical components are processed using CNC machining centers to guarantee the assembly accuracy of the entire machine.5.

Equipment Features:1. Adopts the world-leading CNC control system with superior performance, a pioneering effort in China.2. Simple and quick parameter input, easy operation.3. Servo control system for feeding and bending.4. Can simulate actual bending graphics with a lifelike frame.5. Capable of bending irregular shapes such as rectangles, circles, squares, arches, trapezoids, pentagons, triangles, etc.6. Four material storage slots for storing aluminum bars of different specifications and lengths.7. Can simultaneously set data for 800 different specifications of aluminum frame sizes.8.

Equipment features:1. Automatically realizes the 45°~90° sawing conversion.2. The saw blade cutting stroke is large, capable of cutting a maximum profile width of 320mm, and can also cut four materials of the 60 series or below at once.3. Equipped with a horizontal and vertical bidirectional clamping system to ensure positioning accuracy and adapt to clamping of different series of profiles.4. Both machine heads are equipped with protective covers to ensure operator safety.5. The machine tool guide rail and the head feed adopt a linear bearing motion pair.6.

Equipment features:1. Can produce laminated bulletproof glass, curved laminated glass, marble laminated glass, solar cell glass, conductive glass.2. Uses human-machine dialogue, computer control, and all processes are automated.3. The production line is programmed with PLC for more precise temperature control. Time and temperature can be adjusted arbitrarily according to different glass thicknesses, ensuring a 100% pass rate.4. Utilizes a stable vacuum system for continuous operation, improving work efficiency and yield.5.

Equipment Features:1. The equipment frame is welded with high-quality steel and undergoes aging treatment, ensuring long-term use without deformation.2. Japanese SMC proportional valve controls the cutting blade, and German cutting wheel is used.3. Utilizes well-known domestic electrical components.4. Features high-quality, high-density waterproof panels that are resistant to deformation.5. Equipped with a servo motor.6. The cutting blade on the left side can rotate 360 degrees, and it performs top-down cutting, accurately cutting any straight or irregular glass shapes.7.

Equipment features:1. The equipment frame is welded with high-quality steel and undergoes aging treatment, ensuring long-term use without deformation.2. Japanese SMC proportional valve controls the machine's cutting motion.3. Equipped with a domestically renowned brand knife holder and German cutting wheel.4. Uses high-quality, high-density waterproof panels that are resistant to deformation.5. Utilizes a servo motor for operation.6. The cutting knife on the left can rotate 360 degrees, allowing for both horizontal and vertical cutting.7.

Equipment features:1. Fully automatic cutting and processing for straight or irregular shapes according to user requirements. Direct input of glass dimensions for cutting, real-time display of cutting patterns, and actual movement tracking for clear monitoring of equipment and processing conditions.2. Cutting pressure is entirely computer-controlled, ensuring high cutting quality.3. Rack and pinion components use high-quality products from internationally renowned brands, guaranteeing cutting precision, speed, and accuracy.4.

Purpose: Suitable for insulating glass production lines, increasing the force by changing the pressureThe hydraulic system of a hollow glass gluing machine plays a crucial role in providing the necessary power and control for the machine's operation. It employs hydraulic fluid to transmit force and pressure to various components, enabling precise and efficient gluing processes. The hydraulic system consists of several key components, including a hydraulic pump, hydraulic cylinders, valves, and an oil reservoir.

Seal ringPurpose: Suitable for insulating glass gluing machines to prevent leakage or penetration of media such as fluids or gases1. The sealing ring of the hollow glass gluing machine is a crucial component that ensures the tight and secure sealing of the machine during operation. It serves to prevent any leakage of adhesive material during the gluing process.2. The sealing ring is typically made from high-quality materials such as rubber or silicone, which are known for their excellent elasticity, durability, and resistance to chemicals.

Glue NozzleUsage: Suitable for a fully automatic gluing machine in insulating glass equipment.The glue nozzle in the gluing machine of insulating glass equipment is a critical component used to evenly apply adhesive onto the glass frame. It is located at the end of the gluing machine and is responsible for conveying adhesive from the adhesive supply system onto the glass frame.Here is an introduction to the glue nozzle in the gluing machine of insulating glass equipment:1. Structure and Material: Glue nozzles are typically made from corrosion-resistant materials, such as stainless steel.

B-Glue PumpUsage: Suitable for use in insulating glass (IG) sealing machines.The B-glue pump in an insulating glass sealing machine plays a crucial role in supplying adhesive (B-glue) to ensure a stable and uniform distribution of glue. The B-glue pump typically consists of an electric motor and a pump body.

Equipment Features:1. Three pairs of brushes for chambered cleaning, equipped with high-pressure water sprayer to ensure thorough cleaning. All brushes are made of soft high-temperature filaments to prevent damage to the coated surface of coated glass.2. The cleaning chamber is covered with an acrylic water shield, which is easy to dismantle for maintenance.3. The cleaning machine box allows direct observation of the glass conveyance and cleaning process through acrylic glass during operation.4.

Equipment Features:1. This machine is mainly used for the cleaning and pre-treatment of processed insulating glass, tempered glass, and flat glass.2. It features high production efficiency, safety, reliability, and ease of maintenance.3. Brush spacing is adjustable, and the brushes are gear-driven, ensuring low noise.4. Made of stainless steel and other corrosion-resistant materials, it has excellent waterproof performance, safety, hygiene, and a long equipment lifespan.5.

Equipment Features:1. Adopts advanced cleaning technology, capable of completing a large amount of glass cleaning tasks in a short time, significantly improving production efficiency.2. Fully automated control during the cleaning process, eliminating the need for manual intervention, thereby reducing labor costs and enhancing equipment stability.3. Utilizes various cleaning methods such as high-pressure spraying and ultrasonic vibration to thoroughly remove impurities from the glass surface, ensuring cleaning quality.4.

Equipment Features:1. Economical, easy to maintain, suitable for medium-sized enterprises and window and door companies.2. Part of the glass size connects the production line, automatically completing the gluing process with simple operation.3. Standardized design for increased convenience in maintenance.4. Human-machine interface with an operation interface designed with simplified thinking, making it straightforward.5.