double glass edger machine-manufacture,factory,supplier from China

Equipment features:1. Continuous double straight-line parallel circular edge rapid grinding for flat glass.2. Uses a high-precision transmission structure with double straight-line guides and double ball screw.3. Convenient movement of the intermediate bracket.4. PLC control for automatic monitoring, detection, and alarm diagnosis.5. Smooth conveying with frequency conversion speed control.6. Automatic adjustment after setting processing parameters through the human-machine interface.7.

Equipment Features:1. The sawing machine is composed of mechanical, electrical, hydraulic, and other parts, featuring automatic clamping, automatic feeding, and automatic rise of the saw frame after cutting.2. The feed speed and cutting speed are continuously adjustable within a given range.3. Double-column guidance, stable double-column structure, reliable performance, and pleasing appearance.4. The lifting of the saw beam uses high-precision chromium round columns to ensure the perpendicularity and accuracy of the workpiece cutting surface.5.

Equipment Features:1. The cleaning section's water tank adopts a stainless steel double-layer bottom plate with an upper conveyor function, providing excellent waterproof performance and ensuring a long equipment lifespan.2. The cleaning section is equipped with a wind-heating system, water-heating system, and three3. The drying section implements double-circulating hot air to ensure effective glass drying while reducing noise.4. It uses well-known brands for low-voltage electrical components, sensors, PLC, ensuring safety, reliability, and a long lifespan.5.

Equipment Features:1. One-key power switch, simple operation, mature technology.2. Encoder aluminum strip depth detection, cylinder-driven non-stick glue, more accurate detection.3. Pioneering the use of two bent mixing nozzles, with a simple and convenient structure, and the option for a non-burning mixing nozzle.4. The nozzle switch and mixing switch can replace any domestic pneumatic switch.5. The guide wheel uses double-layer materials, with a higher design cost, a more wear-resistant surface, and more flexible internal rotation.6.

Equipment features:1. Automatically realizes the 45°~90° sawing conversion.2. The saw blade cutting stroke is large, capable of cutting a maximum profile width of 320mm, and can also cut four materials of the 60 series or below at once.3. Equipped with a horizontal and vertical bidirectional clamping system to ensure positioning accuracy and adapt to clamping of different series of profiles.4. Both machine heads are equipped with protective covers to ensure operator safety.5. The machine tool guide rail and the head feed adopt a linear bearing motion pair.6.

Equipment features:1. Heavy body design, stable and reliable operation2. Once clamping, can complete the milling of all the drainage holes and pressure balance holes of a material3. The use of frequency conversion high-speed motor, minimal noise, high speed, to ensure long service life of props, high milling accuracy4. The work structure is designed for servo motor with screw movement, with high running accuracy5. Modular structure, six milling heads, can be single action or linkage6.

Equipment features:1. The machine is equipped with three beams and four grinding head groups, each grinding head group is equipped with two and three bottom edge grinding wheels, which is suitable for rough grinding chamfering and bottom edge processing of building hollow and door and window glass.2. Easy to operate, can automatically adapt to the change of glass length and width, loose processing efficiency close to the whole processing efficiency3. The conveying part is carried by rubber roller, which has stable conveying and long service life.4.

Equipment features:1. The equipment frame is welded with high-quality steel and undergoes aging treatment, ensuring long-term use without deformation.2. Japanese SMC proportional valve controls the machine's cutting motion.3. Equipped with a domestically renowned brand knife holder and German cutting wheel.4. Uses high-quality, high-density waterproof panels that are resistant to deformation.5. Utilizes a servo motor for operation.6. The cutting knife on the left can rotate 360 degrees, allowing for both horizontal and vertical cutting.7.

Equipment Features:1. Adopts advanced cleaning technology, capable of completing a large amount of glass cleaning tasks in a short time, significantly improving production efficiency.2. Fully automated control during the cleaning process, eliminating the need for manual intervention, thereby reducing labor costs and enhancing equipment stability.3. Utilizes various cleaning methods such as high-pressure spraying and ultrasonic vibration to thoroughly remove impurities from the glass surface, ensuring cleaning quality.4.

5. Universal JointUsage: Suitable for the rotational use of the nozzle of a fully automatic gluing machine in insulating glass equipment.1. A universal joint is a critical component in the gluing machine of insulating glass equipment, used to connect the gluing machine's nozzle and adhesive delivery hose, enabling flexible movement and adjustment of the nozzle in various directions.

Seal ringPurpose: Suitable for insulating glass gluing machines to prevent leakage or penetration of media such as fluids or gases1. The sealing ring of the hollow glass gluing machine is a crucial component that ensures the tight and secure sealing of the machine during operation. It serves to prevent any leakage of adhesive material during the gluing process.2. The sealing ring is typically made from high-quality materials such as rubber or silicone, which are known for their excellent elasticity, durability, and resistance to chemicals.

Equipment features:1. The base, main beam, grinding head seat, etc., are made of high-quality castings, sturdy, stable, and the square main beam never deforms.2. The grinding head motor uses a high-quality and advanced specialized motor, "Schneider" brand electrical components.3. Equipped with a 2.2kw wide-range speed regulator, Pearl River turbine gearbox for more durable transmission.4. Conveyor chain transmission, reinforced square tube frame can bear the processing of original thick glass.5. Continuous processing of glass of the same thickness is possible.6.

Purpose: Suitable for insulating glass production lines, increasing the force by changing the pressureThe hydraulic system of a hollow glass gluing machine plays a crucial role in providing the necessary power and control for the machine's operation. It employs hydraulic fluid to transmit force and pressure to various components, enabling precise and efficient gluing processes. The hydraulic system consists of several key components, including a hydraulic pump, hydraulic cylinders, valves, and an oil reservoir.

Glue NozzleUsage: Suitable for a fully automatic gluing machine in insulating glass equipment.The glue nozzle in the gluing machine of insulating glass equipment is a critical component used to evenly apply adhesive onto the glass frame. It is located at the end of the gluing machine and is responsible for conveying adhesive from the adhesive supply system onto the glass frame.Here is an introduction to the glue nozzle in the gluing machine of insulating glass equipment:1. Structure and Material: Glue nozzles are typically made from corrosion-resistant materials, such as stainless steel.

Equipment Features:1. Three pairs of brushes for chambered cleaning, equipped with high-pressure water sprayer to ensure thorough cleaning. All brushes are made of soft high-temperature filaments to prevent damage to the coated surface of coated glass.2. The cleaning chamber is covered with an acrylic water shield, which is easy to dismantle for maintenance.3. The cleaning machine box allows direct observation of the glass conveyance and cleaning process through acrylic glass during operation.4.

Equipment Features:1. This equipment utilizes laser measurement and CNC control to accurately calculate and control processing dimensions, ensuring the precision and quality of doors and windows.2. Equipped with an intelligent control system, the operation is simple. Just input the processing dimensions and angles, and the machine can automatically complete the processing, reducing labor costs and operational difficulty.3. It has various processing functions such as cleaning, cutting, drilling, etc., meeting the processing needs of doors and windows of different shapes and sizes.4.

Equipment Features:1. This machine is mainly used for the cleaning and pre-treatment of processed insulating glass, tempered glass, and flat glass.2. It features high production efficiency, safety, reliability, and ease of maintenance.3. Brush spacing is adjustable, and the brushes are gear-driven, ensuring low noise.4. Made of stainless steel and other corrosion-resistant materials, it has excellent waterproof performance, safety, hygiene, and a long equipment lifespan.5.

Equipment Features:1. The equipment frame is welded with high-quality steel and undergoes aging treatment, ensuring long-term use without deformation.2. Japanese SMC proportional valve controls the cutting blade, and German cutting wheel is used.3. Utilizes well-known domestic electrical components.4. Features high-quality, high-density waterproof panels that are resistant to deformation.5. Equipped with a servo motor.6. The cutting blade on the left side can rotate 360 degrees, and it performs top-down cutting, accurately cutting any straight or irregular glass shapes.7.

Equipment features:1. Can produce laminated bulletproof glass, curved laminated glass, marble laminated glass, solar cell glass, conductive glass.2. Uses human-machine dialogue, computer control, and all processes are automated.3. The production line is programmed with PLC for more precise temperature control. Time and temperature can be adjusted arbitrarily according to different glass thicknesses, ensuring a 100% pass rate.4. Utilizes a stable vacuum system for continuous operation, improving work efficiency and yield.5.

Glue MixerUsage: Suitable for the mixing of adhesive A and B in a fully automatic gluing machine.1. A glue mixer is an important component in the gluing machine of insulating glass equipment, used to uniformly mix solid particles in the adhesive to provide consistent adhesive quality and stable adhesive application results.

Nylon DiscUsage: Suitable for the nozzle of a fully automatic gluing machine in insulating glass equipment.1. A nylon disc is a common component in the gluing machine of insulating glass equipment, designed to provide a stable operating platform and a smooth path for adhesive delivery.

Main performance characteristics1. Motion controller system, man-machine interface, easy operation.2. Filling under closed conditions solves the problem of desiccant water absorption failure and improves efficiency and life of insulating glass.3. The core controls are imported brands.4. Aluminum strip back middle drilling, filling, automatic sealing.5 Can fill automatic bending aluminum frame and ordinary straight insert Angle aluminum frame.6. The filling height can be adjusted according to the size of the aluminum frame.7. Unique advanced feeding device, automatic feeding.8.

Purpose: Used in automatic gluing machines for insulating glass, controlling the on/off flow of adhesive.The pneumatic switch valve for the hollow glass equipment coating machine is a key component used to control the flow of adhesive.This switch valve is pneumatically operated, meaning it is activated or deactivated by a controlled air source.

B-Glue PumpUsage: Suitable for use in insulating glass (IG) sealing machines.The B-glue pump in an insulating glass sealing machine plays a crucial role in supplying adhesive (B-glue) to ensure a stable and uniform distribution of glue. The B-glue pump typically consists of an electric motor and a pump body.